About
Refinishing
I'm refinishing since 1984 and I
must say I have done it all and used all kinds of products, you will
always have a very positive surprise with our services, that is our
promise and we have a 100% Customer Satisfaction to back us up!
All firearms must to be shipped
directly to us for refinishing, restoration or repair since we are a
BATFE Licensed Firearms Manufacturer. You do not need to have an FFL
(federal Firearms License) or ship your firearm through a local
firearms dealer. We will ship the firearm back directly to you.
For Machine Guns, Suppressors and
other Title II Firearms, the same policy applies. No BATFE Form 5
is required by BATFE to ship Tittle II firearms to a Class II
Manufacturer, you must attach a copy of your existing BATFE FORM
showing that the firearm is registered in your name.
Turn around time is usually one
week or less, you will be informed when to ship your Firearm so when
it arrive at our Shop we actually will work on it, not seating in
the shelf for weeks. We are very proud of our system!
Shipper is responsible for
shipping/insurance fees both ways, You can use UPS, FedEx for all
weapons and USPS for long guns and machine guns (not handguns)
Available
Colors for Refinishing
Refinish in
Molly Coat Resin:
-
GLOSSY
BLACK - Very Glossy black that looks
like an expensive black "blue-job" wet with oil.
BLACK Flat
Black in coloration with a non-reflective dull
matte appearance. This a slightly darker shade
compared to the above Grayish-Black Moly Resin™.
Norrell Manufacturing supplies this Mil-Spec
finish to the sub-contractors that manufacture
US SOCOM (U.S. Special Operations Command)
products for H&K and the U.S. Military such as
the sound suppressor for the H&K Mark 23 SOCOM
.45 Cal. pistol used by the Navy Seals and
Special Forces. It is also used by a number of
firearm manufacturers. Our most popular color.
BLACK
Semi-Gloss
Black in coloration with a slight gloss that is
similar in appearance to the H&K (Heckler &
Koch) type finish. Good match to H&K, UZI, and
other similar semi-gloss black guns.
GRAYISH-BLACK Flat
Dark gray-black coloration with a flat
appearance. This duplicates the appearance of
the early original Colt AR-15/M-16 finish. This
is the same product that is purchased from us by
the U.S. Military to refinish Colt M-16's.
GRAY
Flat
A match to older gray military parkerizing
including some very early Colt M-16 rifles. Gray
flat in coloration with an almost unnoticeable
(except under certain lighting conditions) a
very slight tint of green. This is a lighter
shade of gray than our Greenish-Gray.
GREENISH-GRAY Flat
This is an exact Mil-Spec color match to the
U.S. Military parkerizing seen on older military
firearms there are turned slightly green due to
storage in cosmoline. Base color is
grayish-black flat.
GREEN
Flat (Olive Drab)
Olive (flat) drab green that is a match to U.S.
Military OD green. Also used by a well-known
U.S. handgun manufacturer for their .45 cal.
pistols and shotguns.
TAN
Flat, BROWN Flat, and OFF-WHITE Flat
Basic Camo colors (Tan is new U.S. Military
mid-east desert tan 30118 color fed standard
595B)
STAINLESS STEEL
Powdered stainless steel metal mixed with clear
phenolic Moly Resin. Gives the appearance of
brushed stainless steel when applied over any
type of metal. A pleasantly surprising match to
real stainless. Used primarily to color match
small parts such as scope rings, bases, and
other parts, etc. when they are not available in
stainless. For best match to brushed stainless,
this coating is recommended to be sprayed over a
smooth non-abrasive air blasted surface.
CLEAR
COAT
Moly Resin phenolic resin with no coloration
pigments or additives for lubrication. Can be
applied over a cured colored Moly Resin coating
or to bare metal. |
|
Refinish in
Duracoat
-Camo Patterns-
Industrial Dye Finish
(polymer
parts)
HK USC
in Black
HK
SL8-1 in Black
Steyr AUG/ FN
PS90/ and others
PARKERIZING
FINISHING
Coming soon
BLUEING
FINISHING
Coming soon
ANODIZING
FINISHING
Coming soon
|
Molly Coat Resin
Specifications
Appearance:
The bonded coating will appear uniform in color, smooth
and free from cracks, runs, sags, scratches, pin holes,
blisters, bubbles, and foreign matter.
Thickness:
The optimal thickness of the coating will be between
.0003" and .0009" unless a thicker coating is desired.
The thin coating characteristics of less than one
thousands of an inch allows easy re-assembly of
precision fitted parts
Lubricity:
Moly Resin™ contains molybdenum disulfide, which
provides excellent anti-friction characteristics. Wear
life is comparable to blued, parkerized and other common
firearm finishes. Moly Resin™ is a phenolic Resin
that when thermally cured, produces the most durable
thermally cured painted surface of any products on the
market. Wear life when tested on Tabor Abrasurf with
#CS10 wheel installed @ 500 grams weight minimum 235
RPM's.
Thermal Stability:
The cured coating will withstand exposure at 500 f for
1000 hours minimum and 1000 hour minimum soak at -125 f.
Minimum initial oxidation temperature is 880 f. Thermal
breakaway is 1000 f minimum.
Fluid Resistance:
Moly Resin™ will meet 24 hour emersion
requirements in the following fluids: aviation gasoline,
hydraulic fluid, jet fuel, lubricating oils, paint
removers, trichlorethylene, nitric, sulphuric and
hydrochloric acids, hydrogen peroxide, gun powder
solvents, strong bases such as ammonium and sodium
hydroxide, and numerous other strong chemicals.
Corrosion
Resistance:
Moly Resin™, when applied to bare sandblasted
cold rolled steel will pass the test procedures for salt
water spray at 1000 hours, salt water immersion at a
minimum of 1000 hours, accelerated salt spray test
equivalent to 30 years marine atmosphere exposure, and
60 days sea water immersion.
Hardness:
Hardness is 1H. This meets and/or exceeds the hardness
of any Epoxy,Teflon or other thermally cured firearm
coating or paints on the market.
|
|
