Military/Law Enforcement/C3 Dealers | Homeland Defense Police Supply https://www.hdps.org H&K HK PARTS USC UMP SL8 G36 Block B Rail set Conversion parts and services Fri, 18 Apr 2025 18:42:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.hdps.org/wp-content/uploads/2020/10/cropped-hdps-favicon-32x32.png Military/Law Enforcement/C3 Dealers | Homeland Defense Police Supply https://www.hdps.org 32 32 ***SOLD***FACTORY Israeli IMI MINI UZI 9mm Submachine Gun – TRANFERABLE TO CIVILIANS – RARE 100% IMI ISRAELI FACTORY https://www.hdps.org/product/israeli-imi-mini-uzi-9mm-submachine-gun-pre-86-dealer-sample-keeper/ Sun, 28 Apr 2024 00:12:44 +0000 https://www.hdps.org/?post_type=product&p=5217 SOLD Israeli IMI MINI UZI 9mm Sub Machine Gun – TRANSFERABLE TO CIVILIANS - RARE WHITE FLY This is NOT a conversion, this is a genuine Mini UZI Sub Machine Gun from IMI ISRAEL, real deal. Pristine and maybe just test fired at factory as no marks on receiver indicates any use, no brass shell marks on bolt either. Will transfer to your Class 3 dealer using an eForm 3, usualy 72 hours turn around. What you see is what you will get:- FACTORY IMI Israel Mini UZI - 25 Rds Magazine that come with it from IMI ISRAEL  and  Original Sling, not show in photos]]> SOLD Israeli IMI MINI UZI 9mm Sub Machine Gun – TRANSFERABLE TO CIVILIANS - RARE WHITE FLY This is NOT a conversion, this is a genuine Mini UZI Sub Machine Gun from IMI ISRAEL, real deal. Pristine and maybe just test fired at factory as no marks on receiver indicates any use, no brass shell marks on bolt either. Will transfer to your Class 3 dealer using an eForm 3, usualy 72 hours turn around. What you see is what you will get:- FACTORY IMI Israel Mini UZI - 25 Rds Magazine that come with it from IMI ISRAEL  and  Original Sling, not show in photos]]> ***SOLD*** COLT M16A1 MACHINE GUN – BATFE Registered NFA – TRANSFERABLE TO CIVILIANS * MAY 2024 * https://www.hdps.org/product/colt-m16a1-machine-gun-batfe-registered-nfa-transferable-to-civilians/ Sat, 27 Apr 2024 23:57:37 +0000 https://www.hdps.org/?post_type=product&p=5209 ***SOLD*** COLT M16A1 MACHINE GUN - BATFE Registered NFA - TRANSFERABLE TO CIVILIANS From my personal collection, this was a Safe Queen for decades, no more than 100 rounds through. (I only shoot Post Samples) They are getting scarce and very hard to find in this condition. Great investment for the collectors! TRANSFERABLE TO CIVILIANS - make sure to contact your local NFA  transfer Dealer and check your State and local Laws. Serial Number 9160XXX. On Form 3 and ready to eFile to your NFA Dealer What you see is what you will get: COLT M16A1 Machine gun Two original to the M16A1 Colt 20 rds magazine with metal followers Two Pre ban Colt 30 rounds magazines. Manual, Warranty card, cleaning kit.]]> ***SOLD*** COLT M16A1 MACHINE GUN - BATFE Registered NFA - TRANSFERABLE TO CIVILIANS From my personal collection, this was a Safe Queen for decades, no more than 100 rounds through. (I only shoot Post Samples) They are getting scarce and very hard to find in this condition. Great investment for the collectors! TRANSFERABLE TO CIVILIANS - make sure to contact your local NFA  transfer Dealer and check your State and local Laws. Serial Number 9160XXX. On Form 3 and ready to eFile to your NFA Dealer What you see is what you will get: COLT M16A1 Machine gun Two original to the M16A1 Colt 20 rds magazine with metal followers Two Pre ban Colt 30 rounds magazines. Manual, Warranty card, cleaning kit.]]> CZ BREN 2Ms 5.56 Cal 8″ Barrel SBR with CZ .922r compliant RARE FIND NEW https://www.hdps.org/product/cz-bren-2ms-5-56-cal-8-barrel-sbr-with-cz-922r-compliant-rare-find-new/ Tue, 20 Feb 2024 03:09:07 +0000 https://www.hdps.org/?post_type=product&p=5136 FOR THOSE THAT ONLY WANT THE BEST! Up for sale NIB CZ BREN 2Ms Short Barreled Rifle (NFA) on eForm 2 and ready to transfer to your Class 3 Dealer on a eForm 3 (is taking 1~2 days for eForm 3 approvals) SBR done correctly by HDPS CORP custom shop using original factory CZ 922.r Compliance parts for its legality. Note that these CZ 922.r compliance parts kit are not in stock for over an year and it is discontinued. If you find one, it will be well over $600. You can piece toguether  U.S. made complaince parts and the total will be around that as well, or more, just the handguard is over $200, the folding stock is $250, flash suppressor, sear, gas piston ....do the math!  The weapon you see is the weapon for sale, no surprises, it has Tritium night sights, extra magazine (total two), a venom Flash Hider Based on the select-fire Bren 2, this handy firearm operates via a short-stroke gas piston system with a return spring contained within the action itself. A true lightweight, the Bren 2 has an aluminum upper and a lower made of carbon fiber composite. The Ms designation means that it employs a modular forend that can be swapped to different lengths or styles based on user preference/need. Its non-reciprocating charging handle stays stowed in the forward position until it is needed and is swappable from side to side. An AR-style bolt catch/release system is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous.]]> FOR THOSE THAT ONLY WANT THE BEST! Up for sale NIB CZ BREN 2Ms Short Barreled Rifle (NFA) on eForm 2 and ready to transfer to your Class 3 Dealer on a eForm 3 (is taking 1~2 days for eForm 3 approvals) SBR done correctly by HDPS CORP custom shop using original factory CZ 922.r Compliance parts for its legality. Note that these CZ 922.r compliance parts kit are not in stock for over an year and it is discontinued. If you find one, it will be well over $600. You can piece toguether  U.S. made complaince parts and the total will be around that as well, or more, just the handguard is over $200, the folding stock is $250, flash suppressor, sear, gas piston ....do the math!  The weapon you see is the weapon for sale, no surprises, it has Tritium night sights, extra magazine (total two), a venom Flash Hider Based on the select-fire Bren 2, this handy firearm operates via a short-stroke gas piston system with a return spring contained within the action itself. A true lightweight, the Bren 2 has an aluminum upper and a lower made of carbon fiber composite. The Ms designation means that it employs a modular forend that can be swapped to different lengths or styles based on user preference/need. Its non-reciprocating charging handle stays stowed in the forward position until it is needed and is swappable from side to side. An AR-style bolt catch/release system is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous.]]> UMP HDPS 7.87″ THREADED .578×28 RH  STAINLESS STEEL FINISHED IN CERAKOTE BARREL for HK UMP AND USC (Compliance Part) (Copy) https://www.hdps.org/product/ump-hdps-7-87%e2%80%b3-threaded-578x28-rh-stainless-steel-finished-in-cerakote-barrel-for-hk-ump-and-usc-compliance-part-copy/ Tue, 16 May 2023 18:21:31 +0000 http://hdps.org/?post_type=product&p=4839 IN STOCK!

UMP HDPS 7.87″ THREADED .578x28 RH BARREL - STAINLESS STEEL FINISHED WITH CERAKOTE  FOR HK UMP AND USC

THE BEST BARREL ALL THE WAY AROUND FOR HK UMP or SBR USC Threaded .578x28 RH
Those barrels are made from blanks, turned on centers, machine finish. Stress relieved & Air gaged to +/- .0002″.  Our barrels are an exact reproduction with all German specs. not a low profile barrel. Also, our USC barrels have the same design of the UMP barrel by the chamber face allowing so All barrels are compatible with USC bolt/carrier AND UMP bolt/carrier!!
]]> IN STOCK!

UMP HDPS 7.87″ THREADED .578x28 RH BARREL - STAINLESS STEEL FINISHED WITH CERAKOTE  FOR HK UMP AND USC

THE BEST BARREL ALL THE WAY AROUND FOR HK UMP or SBR USC Threaded .578x28 RH
Those barrels are made from blanks, turned on centers, machine finish. Stress relieved & Air gaged to +/- .0002″.  Our barrels are an exact reproduction with all German specs. not a low profile barrel. Also, our USC barrels have the same design of the UMP barrel by the chamber face allowing so All barrels are compatible with USC bolt/carrier AND UMP bolt/carrier!!
]]> FN PS90 SBR https://www.hdps.org/product/fn-ps90-sbr/ Sun, 18 Dec 2022 00:21:13 +0000 http://hdps.org/?post_type=product&p=4584 FN PS90 Short Barreled Rifle  (transferred to your local FFL/SOT on a Form 3) Chambered in the 5.7x28mm cartridge, the FN® PS90™ utilizes blowback operation and fires from a closed bolt for greater accuracy and reliability. The FN® PS90™’s civilian legal 16.04″ cold hammer-forged MIL-SPEC barrel is equipped with an integrated muzzle brake to reduce recoil. Dual magazine latches, cocking handles and an innovative synthetic thumbhole stock with a molded-in sling attachment point help make the FN® PS90™ fully ambidextrous. Models with 10 or 30-round polymer detachable magazines are available.

SPECS

  • CALIBER: 5.7x28mm
  • OPERATION: Closed bolt, blowback
  • MAG CAPACITY: 10 or 30 rd.
  • WEIGHT: 6.28 lb.
  • BARREL LENGTH: 10.4"
  • STOCK COLOR: Matte Black
  • OVERALL LENGTH: 26.23"

GENERAL SPECIFICATIONS

Semi-auto only

BARREL

10.40" M12x1 LH with extension threaded 1/2x28 tpi accepting all AR-15 flash suppressors and attachments Ported Flash Suppressor

RECEIVER

Bottom ejection port Alloy upper receiver and barrel support

STOCK

Synthetic thumbhole bullpup design Forward handstop Molded-in rear sling attachment point

OPERATING CONTROLS

Ambidextrous charging handles Sliding trigger Ambidextrous safety switch inside trigger guard Enlarged trigger guard Ambidextrous magazine release

MAGAZINE - Translucent polymer body

SIGHT - MIL-STD 1913 accessory rail and back-up iron sight

]]> FN PS90 Short Barreled Rifle  (transferred to your local FFL/SOT on a Form 3)

Chambered in the 5.7x28mm cartridge, the FN® PS90™ utilizes blowback operation and fires from a closed bolt for greater accuracy and reliability. The FN® PS90™’s civilian legal 16.04″ cold hammer-forged MIL-SPEC barrel is equipped with an integrated muzzle brake to reduce recoil. Dual magazine latches, cocking handles and an innovative synthetic thumbhole stock with a molded-in sling attachment point help make the FN® PS90™ fully ambidextrous. Models with 10 or 30-round polymer detachable magazines are available.

SPECS

  • CALIBER: 5.7x28mm
  • OPERATION: Closed bolt, blowback
  • MAG CAPACITY: 10 or 30 rd.
  • WEIGHT: 6.28 lb.
  • BARREL LENGTH: 10.4″
  • STOCK COLOR: Matte Black
  • OVERALL LENGTH: 26.23″

GENERAL SPECIFICATIONS

Semi-auto only

BARREL

10.40″ M12x1 LH with extension threaded 1/2×28 tpi accepting all AR-15 flash suppressors and attachments
Ported Flash Suppressor

RECEIVER

Bottom ejection port
Alloy upper receiver and barrel support

STOCK

Synthetic thumbhole bullpup design
Forward handstop
Molded-in rear sling attachment point

OPERATING CONTROLS

Ambidextrous charging handles
Sliding trigger
Ambidextrous safety switch inside trigger guard
Enlarged trigger guard
Ambidextrous magazine release

MAGAZINE – Translucent polymer body

SIGHT – MIL-STD 1913 accessory rail and back-up iron sight

]]> Heckler and Koch MP5 30 Round Magazine – Genuine Made in Germany – MP5, SP5, MP5K, SP5K, SP89 https://www.hdps.org/product/heckler-and-koch-mp5-30-round-magazine-genuine-made-in-germany-mp5-sp5-mp5k-sp5k-sp89/ Thu, 21 Jul 2022 20:15:52 +0000 http://hdps.org/?post_type=product&p=4430 German – H&K MP5, SP5, SP5K, MP5K 9mm – 30 Round Curved Magazine  – NEW Heckler & Koch German Magazine 9mm 30 Round curved all steel magazine. Made in Germany by Hk
  • HK MP5, SP5, MP5K, SP5K, SP 89 mags are the finest HK  magazines  New factory German magazine.
Compatible with all MP5, MP5K style 9mm firearms such as:
  • HK MP5, SP5, MP5K, SP5K
  • HK94, SP89
  •  MP5 9mm Cloned Variants
  • MP5 style,  clones or other custom builds
]]> German – H&K MP5, SP5, SP5K, MP5K 9mm – 30 Round Curved Magazine  – NEW Heckler & Koch German Magazine 9mm 30 Round curved all steel magazine. Made in Germany by Hk
  • HK MP5, SP5, MP5K, SP5K, SP 89 mags are the finest HK  magazines  New factory German magazine.
Compatible with all MP5, MP5K style 9mm firearms such as:
  • HK MP5, SP5, MP5K, SP5K
  • HK94, SP89
  •  MP5 9mm Cloned Variants
  • MP5 style,  clones or other custom builds
]]> UK 59 Medium Machine Gun UK Vz.59 https://www.hdps.org/product/uk-59-medium-machine-gun/ Tue, 07 Dec 2021 21:50:02 +0000 http://hdps.org/?post_type=product&p=4160 DEALER POST SAMPLE -  GOVERNMENT AGENCY DEMO LETTER NEEDED FOR PURCHASE - 
Original Zbrojovka Vsetin factory UK vz. 59 machine gun imported from the Czech Republic. This machine gun was not built from parts kits.  All numbers-matching original factory machine gun!
UK vz. 59 machine gun overview
The UK vz. 59 is an abbreviation for Univerzální kulomet vzor 59 and this translates to Universal Machine Gun model 1959.   In addition, the name of this machine gun is routinely shortened to UK-59.  It is a right hand belt fed machine gun utilizing non-disintegrating metallic 50 round link belts.  50 round belts can be connected to make for any length belt. The UK-59 is still in service today with the armed forces of the Czech Republic and the Slovak Republic - a real testament to the UK-59 design and reliability!
Contents included:
- one UK-59 machine gun possessing heavy barrel - one spare light barrel - one tripod - one bipod - one sling and armorer kit - belt linker - four 50 round cans with belts - three 250 round cans with belts - original scope and mount -additional light barrel to be used with bipod in Light Machine Gun configuration
Manufacturer Zbrojovka Vsetin
Caliber 7.62 x 54R mm
Operation gas, full automatic only
Locking tilting lock piece

AVAILABLE ONLY FOR GOVERNMENT AGENCIES, LAW ENFORCEMENT DEPARTMENTS AND CLASS 3/SOT DEALERS WITH DEMO LETTER

]]> DEALER POST SAMPLE -  GOVERNMENT AGENCY DEMO LETTER NEEDED FOR PURCHASE - 
Original Zbrojovka Vsetin factory UK vz. 59 machine gun imported from the Czech Republic. This machine gun was not built from parts kits.  All numbers-matching original factory machine gun!
UK vz. 59 machine gun overview
The UK vz. 59 is an abbreviation for Univerzální kulomet vzor 59 and this translates to Universal Machine Gun model 1959.   In addition, the name of this machine gun is routinely shortened to UK-59.  It is a right hand belt fed machine gun utilizing non-disintegrating metallic 50 round link belts.  50 round belts can be connected to make for any length belt. The UK-59 is still in service today with the armed forces of the Czech Republic and the Slovak Republic - a real testament to the UK-59 design and reliability!
Contents included:
- one UK-59 machine gun possessing heavy barrel - one spare light barrel - one tripod - one bipod - one sling and armorer kit - belt linker - four 50 round cans with belts - three 250 round cans with belts - original scope and mount -additional light barrel to be used with bipod in Light Machine Gun configuration
Manufacturer Zbrojovka Vsetin
Caliber 7.62 x 54R mm
Operation gas, full automatic only
Locking tilting lock piece

AVAILABLE ONLY FOR GOVERNMENT AGENCIES, LAW ENFORCEMENT DEPARTMENTS AND CLASS 3/SOT DEALERS WITH DEMO LETTER

]]>